Back to Heating

Apartment Heat Pump in Berlin

Replace the gas boiler in your condominium flat 1:1 with a heat pump, in the same place and connected to your existing radiators.

from around €12,850 incl. subsidy

Example calculation: HeatPump23 Plug and Play S with wall bracket, building with six units, owner-occupied flat, highest subsidy rate of 80 percent with income bonus. Fixed price before subsidy around 26,600 euros gross. Subsidy as of November 2026, subject to available budget funds.

The apartment heat pump replaces the gas boiler in your condominium flat in the same place, without the whole building having to switch over. For this we install the HeatPump23 Plug and Play, an air-to-water heat pump supplied as a complete system, whose indoor unit combines all hydraulic components and an 86-litre domestic hot water cylinder in one casing. Installation, electrical connection, removal of the boiler, heat load calculation and the confirmation for the subsidy application are included in the fixed price.

Apartment heat pump instead of a gas boiler: what happens in your flat

The apartment heat pump replaces exactly one appliance: the gas boiler that heats your flat. We install the HeatPump23 Plug and Play, an air-to-water heat pump supplied as a complete system for existing flats heated by a gas boiler. Its indoor unit combines all hydraulic components and an 86-litre domestic hot water cylinder in one casing. It is connected at the same points as the previous boiler and supplies your existing radiators.

The outdoor unit sits outside. In the standard case it hangs on a wall bracket on the balcony or the facade; alternatively it stands at ground level on its own foundation in the courtyard or garden. Indoor and outdoor units are linked by a line through a wall opening, which runs in plastic trunking inside the flat. The system runs on normal household electricity (230 V) and is operated via a 7-inch touch display or smartphone app.

The appliance comes in two sizes, S and L. Which one fits is determined by the room-by-room heat load calculation, never by an estimate based on living area. Together with the heating surface check, it also shows whether your radiators can keep the rooms warm with the heat pump. We carry out hydraulic balancing to method B within the same contract.

Scope of services at a fixed price: from heat load to disposal of the boiler

The fixed price covers the appliance with accessories, namely sludge separator, microbubble separator and frost protection valves, plus the remote maintenance portal. Installation covers the outdoor and indoor units, the wall opening, the connecting line with plastic trunking, the connection to your radiators, the drinking water connection, filling to VDI 2035, commissioning and the handover briefing.

We take care of the electrical connection, including adapting the meter cabinet and registering with the grid operator. We remove the gas boiler and dispose of it with proof of disposal, which you need for the subsidy application, and we remove the gas pipe back to the gas meter. We allow two working days on site for the installation.

Two points are not part of the contract: as the owner, you deregister the gas meter with the gas supplier, and work on the chimney is not included. If the heating surface check shows that individual radiators are too small, we offer their replacement separately. What the three configurations cost and what grant is possible per flat is shown in the table further down.

Subsidy for the apartment heat pump: why 28,000 euros per flat does not apply

KfW subsidises the replacement through heating subsidy programme 458. The basic subsidy is 30 percent. For an owner-occupied flat that is your main or sole residence, the climate speed bonus of 16 percent is added, provided the gas boiler is in working order and is completely removed. There is no age limit for gas boilers that heat a single flat; the 20 years apply only to central gas heating systems. The income bonus depends on taxable household income: 40 percent up to 30,000 euros, 30 percent from 30,000 to 40,000 euros and 10 percent from 40,000 to 50,000 euros. In total at most 80 percent is possible, and landlords receive only the basic subsidy.

The point many calculations overlook is the basis of assessment. When a flat owner replaces the heating in their flat, this is a measure on separate property, and KfW divides the maximum eligible amount for the whole building equally among all units. For the building this comes to 28,000 euros for the first unit, 15,000 euros each for the second to sixth and 8,000 euros each from the seventh onwards. In a building with six units that is 17,166.67 euros of eligible costs per flat, with eight units 14,875 euros and with twelve 12,583.33 euros. So the 28,000 euros do not apply to your flat alone.

For your planning this means: the grant depends on the number of units in the building and on your subsidy rate, not on the appliance size, because the eligible costs per flat are below our fixed price. The maximum eligible costs for the first unit fall by 750 euros every six months from 1 February 2027. The climate speed bonus applies in full to applications up to 31 January 2027, then falls by 4 percentage points on each 1 February and 1 August and no longer applies from 1 August 2028. As of November 2026, the conditions must be checked before placing the order. The subsidy is subject to available budget funds, and there is no legal entitlement.

Apartment heat pump in an owners' association: resolution for the outdoor unit

The external wall and, as a rule, the balcony are common property. The outdoor unit is therefore a structural alteration and needs a resolution of the owners' meeting under Section 20(1) WEG (German Condominium Act). A simple majority of the votes cast is sufficient. The heat pump is not one of the privileged measures under Section 20(2) WEG that any owner can demand.

There is nevertheless a trend: on 17 July 2026, in a Berlin case (V ZR 162/25), the Federal Court of Justice (BGH) ruled that an owner is in principle entitled to permission for a split air conditioner with an outdoor unit on the balcony, as long as the other owners are not affected beyond the unavoidable extent (Section 20(3) WEG). The ruling concerns air conditioners and not expressly heat pumps, so it cannot be taken as a promise for your case.

Whether the heating in your flat itself belongs to your separate property is governed by the declaration of division. Your property manager or a specialist lawyer can assess how to prepare the resolution and whether your case has any special features.

Process with subsidy: in this order

The subsidy dictates the order. First we sign the contract subject to the subsidy, with a condition that cancels it if the subsidy is not approved. We then prepare the confirmation for the application (BzA). As the flat owner, you submit the application yourself in the Meine KfW portal (My KfW), and you do so before work begins.

After approval we come to your flat for the room-by-room heat load calculation, determine the size and install the system. You then receive the confirmation after completion (BnD) and the invoices with which you request the payout from KfW.

Apartment heat pump or a heat pump for the whole building?

The apartment heat pump is the solution for a single flat: it replaces your gas boiler, and the other flats keep their heating. If, on the other hand, the owners' association wants to replace all the gas boilers in a building together with one central system, that is a different project with new risers, a resolution on the heating of the whole building and a separate subsidy calculation, on which we advise separately. General questions are answered on our page heat pump in Berlin.

Apartment heat pump costs: fixed price and grant per flat

Our fixed prices gross, including 19 percent VAT, before subsidy: HeatPump23 Plug and Play S with wall bracket around 26,600 euros, L with wall bracket around 28,400 euros and S with outdoor unit on its own foundation around 28,000 euros, so around 26,600 to 28,400 euros. The table shows which costs per flat are eligible and what grant results from this at 30, 46 and 80 percent. Your own share is the fixed price minus the grant.

Units in the buildingEligible per flatGrant 30%Grant 46%Grant 80%
2 units€21,500€6,450€9,890€17,200
4 units€18,250€5,475€8,395€14,600
6 units€17,166.67€5,150€7,897€13,733
8 units€14,875€4,463€6,843€11,900
10 units€13,500€4,050€6,210€10,800
12 units€12,583.33€3,775€5,788€10,067

Every owner receives 30 percent, including landlords. 46 percent applies to an owner-occupied flat with the climate speed bonus, 80 percent is the maximum rate with the income bonus. Example: size S with wall bracket (26,580 euros gross) in a building with six units and 80 percent subsidy results in a grant of 13,733 euros and an own share of around 12,850 euros. KfW heating subsidy programme 458, as of November 2026, check conditions before placing the order. Subsidy subject to available budget funds, no legal entitlement.

Our services in detail

Indoor unit with an 86-litre domestic hot water cylinder, all hydraulic components in one casing
Connection in the same place as the gas boiler and to your existing radiators
Outdoor unit on a wall bracket on the balcony or facade, alternatively on its own foundation in the courtyard or garden
Runs on household electricity (230 V), controlled via a 7-inch touch display or smartphone app
Room-by-room heat load calculation, heating surface check and hydraulic balancing to method B
Removal of the gas boiler with proof of disposal and confirmation for the application (BzA) for KfW

Why Montali?

With an apartment heat pump, heating, electrics and subsidy are closely interlinked, and that is exactly where things otherwise get left undone. We handle the installation, the electrical connection including the meter cabinet and registration with the grid operator, the removal of the gas boiler and the confirmation for the application in one contract at a fixed price. We determine the appliance size from the room-by-room heat load calculation and never from an estimate based on living area.

Frequently asked questions about Apartment Heat Pump in Berlin

Two questions decide this: where the outdoor unit can go and how much output your flat needs. The indoor unit of the HeatPump23 Plug and Play is connected at the same points as the previous gas boiler and supplies your existing radiators. In the standard case the outdoor unit hangs on a wall bracket on the balcony or the facade; alternatively it stands on its own foundation in the courtyard or garden. Whether size S or L is right and whether your radiators are sufficient is shown by the room-by-room heat load calculation and the heating surface check. Both are included in the fixed price.

Our fixed prices are around 26,600 to 28,400 euros gross, including 19 percent VAT, before subsidy. Size S with wall bracket costs around 26,600 euros, size L with wall bracket around 28,400 euros and size S with the outdoor unit on its own foundation around 28,000 euros. After subsidy at the maximum rate of 80 percent, size S with wall bracket leaves an own share of around 12,850 euros in a building with six units, 14,680 euros with eight and 15,780 euros with ten units.

For the outdoor unit, as a rule yes. The external wall and usually also the balcony are common property, so the outdoor unit is a structural alteration on which the owners' meeting decides under Section 20(1) WEG. A simple majority of the votes cast is sufficient. The heat pump is not one of the privileged measures under Section 20(2) WEG. Whether the heating in your flat itself belongs to your separate property is governed by the declaration of division. Your property manager or a specialist lawyer will provide the legal assessment of your case.

We allow two working days in your flat for the installation. Before that come the subsidy application and the KfW approval, because the work may only begin after the application. After approval we come for the room-by-room heat load calculation, determine the size and arrange the installation date.

Two things are not part of our contract. As the owner, you deregister the gas meter with the gas supplier yourself, and we remove the gas pipe back to the gas meter. Work on the chimney is also not included. Everything else, from the appliance with accessories through installation and electrical connection to disposal of the boiler with proof of disposal, is part of the fixed price. If the heating surface check shows that individual radiators are too small, we offer their replacement separately.

No. The 20-year limit applies only to central gas heating systems. For the climate speed bonus, the gas boiler in your flat must be in working order and completely removed, and the bonus applies only to an owner-occupied flat that is your main or sole residence. It is 16 percent for applications up to 31 January 2027 and then falls by 4 percentage points on each 1 February and 1 August, and from 1 August 2028 it no longer applies. As of November 2026, the conditions must be checked before placing the order.

Yes, but only the basic subsidy of 30 percent. The climate speed bonus and the income bonus are available only for an owner-occupied flat. For landlords, too, only your flat's share of the building's maximum eligible amount is eligible, so 14,875 euros in a building with eight units. That results in a grant of 4,463 euros.

As the flat owner, you submit the application yourself in Meine KfW before work begins. For this we prepare the confirmation for the application (BzA), and after installation we supply the confirmation after completion (BnD), the proof of disposal for the gas boiler and the invoices you need for the payout.

Project photo 1
Project photo 2

Start your request now

from around €12,850 incl. subsidy

Example calculation: HeatPump23 Plug and Play S with wall bracket, building with six units, owner-occupied flat, highest subsidy rate of 80 percent with income bonus. Fixed price before subsidy around 26,600 euros gross. Subsidy as of November 2026, subject to available budget funds.

Start a request 01556 965 87 02

At a glance

ConsultationFree
Quote turnaround1–3 working days
AreaBerlin & surroundings
SubsidiesConsulting incl.